Professional Detailing

This particular detail is aimed at vehicles with paint work in very good condition thus only needing a thorough cleaning, cleansing and protecting. The process will not only give your vehicle the protection it deserves, but will also make life so much easier in regards to keeping it looking it’s best.

• Wash Stage
  An extensive multi-point ph neutral wash process is carried out including foam pre wash, wheels and tyres thoroughly decontaminated, wheel arches, door shuts, rubber seals and engine bay cleaned.
• Decontamination stage
  This vital part of the detail involves tar spot and embedded contaminant removal with the use of specific solvents, specialist metallic fallout remover and clay bar.
• Secondary rinse
  Vehicle is lightly washed and rinsed off again to remove and residue left from decontamination stage.
• Drying
  Soft microfibre drying towels and hot air blowers are used to dry vehicle.
• Paint prep
  Paintwork is cleansed with a light yet powerful cleaner polish, leaving all surfaces with a greatly improved gloss and a perfect base for the protection products.
• Protection
  A choice of either carnauba wax or acrylic sealant will be applied to all exterior body work, giving up to 4-6 months protection. Wheels are also protected with a dedicated wheel sealant.
• Glass
  All glass is polished with a cerium oxide based product to remove any etched in water marks and other contaminants. A long life glass sealant / rain repellent is then applied which greatly improves visibility when driving in the rain, especially at night.
• Finishing touches
  Exhausts and any bright work polished and protected, exterior trims are sealed and tyres are dressed.

Protection product upgrades.

• Add ceramic coating £300-400

This particular detail is a very popular service as it blurs the line between actual paint correction and the standard protection detail. The technique offers a great visual lift in gloss by removing fine scratches and haze.
A great value for money detail with impressive results.

• Wash Stage
  An extensive multi-point ph neutral wash process is carried out including foam pre wash, wheels and tyres thoroughly decontaminated, wheel arches, door shuts, rubber seals and engine bay cleaned.
• Decontamination stage
  This vital part of the detail involves tar spot and embedded contaminant removal with the use of specific solvents, specialist metallic fallout remover and clay bar.
• Secondary rinse
  Vehicle is lightly washed and rinsed off again to remove and residue left from decontamination stage.
• Drying
  Specific, soft microfibre drying towels are used to dry vehicle.
• Polishing Stage
  A single stage machine polish is carried out to primarily add an impressive amount of gloss but also to reduce the appearance of fine scratches and swirls, holograms and minor marring in the paint.
  Please note this option will not remove deeper scratches and swirl marks.
• Protection
  A choice of either carnauba wax or acrylic sealant will be applied to all exterior body work, giving up to 4-6 months protection. Wheels are also protected with a dedicated wheel sealant.
• Glass
  All glass is polished with a cerium oxide based product to remove any etched in water marks and other contaminants. A long life glass sealant / rain repellent is then applied which greatly improves visibility when driving in the rain, especially at night.
• Finishing touches
  Exhausts and any bright work polished and protected, exterior trims are sealed and tyres are dressed.

Protection product upgrades.

• Add ceramic coatings £300-400

This service is by far the most requested on offer. It provides extra stages of machine polishing over the Enhancement to ensure beautiful levels of gloss and removal or unsightly swirl marks and scratches.
The objective is to remove 80-85% of paint defects.

• Wash Stage
  An extensive multi-point ph neutral wash process is carried out including foam pre wash, wheels and tyres thoroughly decontaminated, wheel arches, door shuts, rubber seals and engine bay cleaned.
• Decontamination stage
  This vital part of the detail involves tar spot and embedded contaminant removal with the use of specific solvents, specialist metallic fallout remover and clay bar.
• Secondary rinse
  Vehicle is lightly washed and rinsed off again to remove and residue left from decontamination stage.
• Drying
  Specific, soft microfibre drying towels are used to dry vehicle.
• Polishing Stage
  A 2/3 stage cutting, polishing and refining machine polish is carried out to almost completely remove those unsightly swirls, scratches and surface marring that detract from the gloss in the vehicles paint finish.
  The perfect polish and pad combination will be chosen to suit the given paint type which ensures the best possible result.
• Protection
  A choice of either carnauba wax or acrylic sealant will be applied to all exterior body work, giving up to 4-6 months protection. Wheels are also protected with a dedicated wheel sealant.
• Glass
  All glass is polished with a cerium oxide based product to remove any etched in water marks and other contaminants. A long life glass sealant / rain repellent is then applied which greatly improves visibility when driving in the rain, especially at night.
• Finishing touches
  Exhausts and any bright work polished and protected, exterior trims are sealed and tyres are dressed.Quartz/nano ceramic upgrades on paint, wheel and trim protection are available on request but will incur extra cost

Protection product upgrades.

• Add ceramic coatings £300-400